Single Row Tapered Roller Bearings
Single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis (apex point A, ) to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor the larger the value of e, the larger the contact angle.
Single Row (TRB) Taper roller bearings can take both axial and radial loads. The axial load carrying capacity of the bearings is largely determined by the contact angle α as shown in the figure below. If the contact angle α is larger, then the axial load carrying capacity is higher and vice versa.This loading flexibility combined with a variety of configurations can be designed from single cups, double cups and cones. This is why tapered roller bearings are designed into almost every industry.
- ZKL 30314A Single Row Tapered Roller Bearings
- 68/670
- 670x820x69
- ZKL 32214A Single Row Tapered Roller Bearings
- 6804Z
- 20x32x7
- ZKL 30214A Single Row Tapered Roller Bearings
- 6280
- 400x720x103
- ZKL 32014AX Single Row Tapered Roller Bearings
- 6820NR
- 100x125x13
- ZKL 32313A Single Row Tapered Roller Bearings
- 638-2RS
- 8x28x9
- ZKL 31313A Single Row Tapered Roller Bearings
- 6906LLU
- 30x47x9
- ZKL 30313A Single Row Tapered Roller Bearings
- 6804-2RZ
- 20x32x7
- ZKL 33213A Single Row Tapered Roller Bearings
- 231/800
- 800x1280x375
- ZKL 32213A Single Row Tapered Roller Bearings
- E-R1939
- 95x122.984x18
- ZKL 30213A Single Row Tapered Roller Bearings
- 6709ZZ
- 45x55x6
- ZKL 33113A Single Row Tapered Roller Bearings
- 7314 B-UO
- 70x150x70
- ZKL 32013AX Single Row Tapered Roller Bearings
- 673SSA
- 3x6x2.5