NACHI DRIVESHAFT,INC.
Single Row Deep Groove Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- ZKL 16005 Single Row Deep Groove Ball Bearings
- 1 1/2 in
- 1.2500 in
- ZKL 62304 Single Row Deep Groove Ball Bearings
- 300 mm
- 500 mm
- ZKL 6304 Single Row Deep Groove Ball Bearings
- 400 mm
- 650 mm
- ZKL 63204 Single Row Deep Groove Ball Bearings
- 440 mm
- 720 mm
- ZKL 62204 Single Row Deep Groove Ball Bearings
- 1120 mm
- 1540 mm
- ZKL 6004 Single Row Deep Groove Ball Bearings
- 1060 mm
- 1460 mm
- ZKL 16004D Single Row Deep Groove Ball Bearings
- 200 mm
- 420 mm
- ZKL 6204 Single Row Deep Groove Ball Bearings
- 65 mm
- 120 mm
- ZKL 62203 Single Row Deep Groove Ball Bearings
- 1120 mm
- 1460 mm
- ZKL 6303 Single Row Deep Groove Ball Bearings
- 50.000 mm
- 90.0000 mm
- ZKL 6003 Single Row Deep Groove Ball Bearings
- 60.000 mm
- 130.0000 mm
