Single Row Deep Groove Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- ZKL 6219 Single Row Deep Groove Ball Bearings
- 17.000 mm
- 40.0000 mm
- ZKL 6218 Single Row Deep Groove Ball Bearings
- 360 mm
- 480 mm
- ZKL 6318 Single Row Deep Groove Ball Bearings
- 280.000 mm
- 420.0000 mm
- ZKL 6018 Single Row Deep Groove Ball Bearings
- 280 mm
- 460 mm
- ZKL 6238M Single Row Deep Groove Ball Bearings
- 190 mm
- 340 mm
- ZKL 6216 Single Row Deep Groove Ball Bearings
- 207FFS
- 35.000 mm
- ZKL 6330 Single Row Deep Groove Ball Bearings
- 100 mm
- 250 mm
- ZKL 6324M Single Row Deep Groove Ball Bearings
- 340 mm
- 520 mm
- ZKL 618/900MA Single Row Deep Groove Ball Bearings
- 75 mm
- 130 mm
- ZKL 6213 Single Row Deep Groove Ball Bearings
- 380 mm
- 560 mm
- ZKL 6013 Single Row Deep Groove Ball Bearings
- 260 mm
- 440 mm
- ZKL 16013 Single Row Deep Groove Ball Bearings
- 850 mm
- 1220 mm