Single Row Deep Groove Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- ZKL 627 Single Row Deep Groove Ball Bearings
- 750 mm
- 1000 mm
- ZKL 626 Single Row Deep Groove Ball Bearings
- 360 mm
- 600 mm
- ZKL 607 Single Row Deep Groove Ball Bearings
- 710 mm
- 1030 mm
- ZKL 625 Single Row Deep Groove Ball Bearings
- 90 mm
- 140 mm
- ZKL 635 Single Row Deep Groove Ball Bearings
- 630 mm
- 920 mm
- ZKL 619 / 6 Single Row Deep Groove Ball Bearings
- 400 mm
- 650 mm
- ZKL 619 / 5 Single Row Deep Groove Ball Bearings
- 100.000 mm
- 180.0000 mm
- ZKL 634 Single Row Deep Groove Ball Bearings
- 460 mm
- 700 mm
- ZKL 624 Single Row Deep Groove Ball Bearings
- 670 mm
- 980 mm
- ZKL 16022 Single Row Deep Groove Ball Bearings
- 280 mm
- 420 mm
- ZKL 619 / 2 Single Row Deep Groove Ball Bearings
- 90.000 mm
- 190.0000 mm
- ZKL 6021 Single Row Deep Groove Ball Bearings
- 320 mm
- 480 mm