| Oil Lubrication - T Seal | 3050 rpm |
| Shaft Tolerance | 0.0015 in |
| Grease Lubrication - M/N Seal | 1700 rpm |
| Weight | 17.0 lb |
| Dimension D | 5.88 in |
| C - Dynamic Load (Basic) | 47800 lb |
| Oil Lubrication - M/N Seal | 1700 rpm |
| Full Timken Part Number | QVVTU14V065SB |
| Dimension P | 4.75 in |
| Engineering Group | Mounted Bearing |
| Dimension G | 1.31 in |
| Dimension RVV | 0.61 in |
| Float | 0.08 in |
| Locking Style | Double V-Lock |
| Pre Install Clearance Max | 0.094 mm |
| Grease Lubrication - B/C/O Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2600 rpm |
| e - Geometry Factor | 0.23 |
| Dimension C | 0.88 in |
| Dimension S | 1.060 in |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | m | D | d | T | B | C | C1 | B1 |
| XR678052 | Timken | - | 457,2 mm | 330,2 mm | 63,5 mm | - | - | - | - |
| VKBA6780 | SKF | - | 82 mm | 45 mm | - | 42 mm | 42 mm | - | - |
| VKBA 3780 | SKF | - | - | - | - | - | - | - | - |
| 234780 | ISO | - | 600 mm | 410 mm | 236 mm | - | - | - | 59 mm |
| 234780 MSP | Loyal | - | 600 mm | 410 mm | 236 mm | - | 630 kN | - | 59 mm |
| 234780-M-SP | FAG | 187 kg / Weight | 600 mm | 410 mm | - | 236 mm | 118 mm | - | - |
| T.P.N. 780 CE | ISB | - | 120 mm | 80 mm | - | 80 mm | 400 kN | 60 mm | - |
| 713667780 | FAG | - | - | - | - | - | - | - | - |
| 713667800 | FAG | - | - | - | - | - | - | - | - |
| 713678010 | FAG | - | - | - | - | - | - | - | - |
| 713678020 | FAG | - | - | - | - | - | - | - | - |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
HSR45-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Video
THK HSR45 Rail - Lavaink Inks Customized Parts
Loose or Tight the screws of THK HSR45 Rail Rail marked yellow to adjust the tension between block and linear rail. Must cleaning your THK Rail perfect because ...
HSR45-570L RAIL THK Linear Motion Guide | Lily Bearing
Find details about thk HSR45-570L RAIL, Get price reference, professional technical support and free 3D drawing Download.Rail type: Caged Ball RailHardness: 58 to 64 HRCMaximum length: 570 mmG: 22.5
THK HSR45-780L RAIL Distributor | 养贞轴承 - bob竞技体育
Find details about thk HSR45-780L RAIL, 的详情,获取价格参考、专业技术支持和免费3D 绘图下载。
THK HSR45-2985L RAIL
THK HSR45-2985L RAIL Linear Motion, LM Guides, Linear bearing, Linear Guide, Ball Splines, Ball Screws, electric actuators, mechatronics products, ...
HSR45-780L RAIL THK Linear Motion Guide - 养贞轴承
HSR45-780L RAIL THK Linear Motion Guide ; Maximum length, 780 mm ; Nominal rail size, 45 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, HSR45.
HSR - THK Technical Support
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate.
THK Store-Standard Rail (HSR)
Rail for HSR Blocks. View specifications and model number coding. Downloads - Log In required. General Catalog LM Guide; Quick Ship Catalog US102-2E.
THK Standard Rail (HSR) | BSPD Bearing Manufacturing
THK Standard Rail (HSR). The HSR guide rail and HSR of the steel ball bearing row are precision-grounded with 4 rolling ... HSR45-780L RAIL, 45 mm, 780 mm.
HSR45 Series Linear Motion Guides - Technico Inc
The THK HSR Series of linear motion guides (also known as "LM guides") incorporate linear rolling motion for practical use. In this series, the rows of ...