| Outside Diameter D | 62.000 mm |
| Features | O.D. Groove |
| Clearance | C0 (Normal) |
| Outside Ring Width B | 17.000 mm |
| Radius Rs min | 1.100 mm |
| C0r - Static Load Rating | 11.2 kN |
| Bore Size d | 25 mm |
| Cr - Dynamic Load Rating | 20.6 kN |
| Oil Reference Speed | 17000 rpm |
| Weight | 0.22 Kg |
| Grease Reference Speed | 12000 rpm |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | C | D | W | B | T | m | s | R |
| Z-567601.ZL-K-C3 | FAG | - | 320 mm | - | 86 mm | - | 31,7 kg / Weight | 7,5 mm / Axial displacement facility from central position | - |
| Z-567601.ZL-K-C5 | FAG | - | 320 mm | - | 86 mm | - | 31,7 kg / Weight | 7,5 mm / Axial displacement facility from central position | - |
| STF760RV1012g | NSK | 20 800 kN | 1 030 mm | - | 750 mm | - | - | - | - |
| T1760 | Timken | - | 76,2 mm | - | - | 10,922 mm | - | - | 0,8 mm |
| 234760 | ISO | - | 460 mm | - | - | 190 mm | - | - | - |
| 234760 MSP | Loyal | 450 kN | 460 mm | - | - | 190 mm | - | - | - |
| 234760-M-SP | FAG | 95 mm | 460 mm | - | 190 mm | - | 86,5 kg / Weight | - | - |
| 234760B | KOYO | 476 kN | 460 mm | 22 mm | 47,5 mm | 190 mm | - | - | - |
| 239760B | KOYO | 352 kN | 420 mm | 14 mm | 36 mm | 144 mm | - | - | - |
| RT-760 | SIGMA | - | - | - | 95,25 mm | - | - | - | - |
| 713630760 | FAG | - | - | - | - | - | - | - | - |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
HSR35-760L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Video
HSR - THK Technical Support
rail. Type of. LM block. Model number. HSR35 R 2 QZ SS C0 M +1400L P T M -Ⅱ. (*1) See contamination protection accessory on 團1-516. (*2) See 團1-72.30 pages
HSR35 Series Linear Motion Guides - Technico Inc
THK HSR35 LM Guide offers high speed and enables us to save energy. ... HSR30, HSR35, HSR45 & HSR55, rail and block lengths range from 160mm to 1600mm.
THK HSR35-760L RAIL - THK,IKO,HIWIN,PMI-HRD-bearing
THK HSR35-760L RAIL Linear Motion, LM Guides, Linear bearing, Linear Guide, Ball Splines, Ball Screws, electric actuators, mechatronics products, ...
HSR-35 by THK - Buy or Repair at Radwell
HSR-35 Machine Parts from THK In Stock, Order Now! Same Day Shipping, 2-Year Warranty - LINEAR GUIDE STANDARD BALL PROFILE RAIL ,SERIES HSR35, 35 MM RAIL.
THK Store-Standard Rail (HSR)
Standard Rail (HSR) ; Size: 15. Rail Length (mm): 760. HSR15-760L RAIL, – ; Size: 15. Rail Length (mm): 820. HSR15-820L RAIL, – ; Size: 15. Rail Length (mm): 940.
THK Standard Rail (HSR) HSR35-760L RAIL | THKbearing ...
Model No. HSR 15, HSR 20, HSR 25, HSR 30, HSR 35, HSR 45, HSR 55, HSR 65. LM rail standard length (L0), 160 220 280 340 400 460 520 580 640 700 760
LM Guide - THK Technical Support
Standard Length and Maximum Length of the LM Rail.. 團1-102. • Tapped-hole LM Rail Type of Model SHS .. 團1-103. Caged Ball LM Guide Radial Type Model SSR .666 pages
Linear Guide (Rail Only) - THK - MISUMI
Linear Guide (Rail Only) - Standard Grade, Interchangeable, HSR Series (THK) of THK, Check out the variety of ... HSR35, 34, 29, 80, 9x14x12, 6.6.Rail Type: StandardMaterial: Carbon Steel
HSR-M1 - THK Technical Support
Since the LM block, LM rail and balls use stainless steel, which is highly corrosion resistant, this model is optimal for clean room applications. [High ...16 pages