| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5 | 41500 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 12200 lbf |
| Aa - Cage-Cone Backface Clearance | 0.13 in |
| D | 6.7500 in |
| C - Double Cup Width | 3.9375 in |
| Cone Part Number | 838 |
| Cup Part Number | 834D |
| T - Bearing Width across Cones | 4.9375 in |
| B - Cone Width | 2.2190 in |
| Y2 - ISO Factor10 | 3.36 |
| Da - Cup Frontface Backing Diameter | 6.14 in |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3 | 23800 lbf |
| K - Factor7 | 1.95 |
| db - Cone Backface Backing Diameter | 3.7 in |
| R - Cone Backface To Clear Radius1 | 0.03 in |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 | 160000 lbf |
| e - ISO Factor8 | 0.3 |
| Y1 - ISO Factor9 | 2.26 |
| Ab - Cage-Cone Frontface Clearance | 0.1 in |
| Bearing Weight | 28.66 lb |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | B | C | r | A | d | H | |
| Z-531160.04.DRGL | FAG | - | 680 mm | 233 mm | 170 mm | - | - | 260 mm | - |
| K81160-M | INA | GS81160 / Allocated housing locating washer | 380 | - | - | - | - | 300 | - |
| K81160M | SKF | - | 380 mm | - | - | - | - | 300 mm | - |
| K 81160-MB | NKE | - | 380 mm | - | - | - | - | 300 mm | - |
| GS 81160 | SKF | - | 380 mm | 18.5 mm | - | - | - | 18,5 | - |
| 51160 | Loyal | - | 376 mm | - | 364 kN | - | - | 300 mm | - |
| 51160 M | ISB | - | 380 mm | - | 357 kN | - | - | 300 mm | 62 mm |
| 51160-MP | FAG | - | 380 mm | - | - | - | 14 / Factor min. load | 300 mm | - |
| 51160M | SKF | - | 380 mm | - | 364 kN | - | - | 300 mm | 62 mm |
| 2RNU11603 | NTN | - | 1000,000 mm | 350,000 mm | 350,000 mm | - | - | 580,000 mm | - |
| 51160X | NSK | - | 380 mm | - | 360 | 2 | - | 300 mm | - |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
HSR35-1160L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Video
LM Guide - THK Technical Support
Flatness of the LM Rail and the LM Block Mounting Surface . ... HSR 8 HSR 10 HSR 12 HSR 15 HSR 20 HSR 25 HSR 30 HSR 35 HSR 45 HSR 55 HSR 65 HSR 85 HSR 100 ...666 pages
THK HSR35 Linear Motion Guide - Technico Inc
THK HSR35 LM Guide offers high speed and enables us to save energy. ... HSR30, HSR35, HSR45 & HSR55, rail and block lengths range from 160mm to 1600mm.
HSR35-1160L RAIL THK Linear Motion Guide | Lily ... - dota2鸭脖电竞
HSR35-1160L RAIL THK Linear Motion Guide ; Maximum length, 1160 mm ; Nominal rail size, 35 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, HSR35.
HSR35-1160L RAIL THK Linear Motion Guide | Lily Bearing
Part Number, HSR35-1160L RAIL. Rail type, Caged Ball Rail. Maximum length, 1160 mm. Nominal rail size, 35 mm. Measurement standard, Metric.Rail type: Caged Ball RailHardness: 58 to 64 HRCMaximum length: 1160 mmG: 20
HSR35-1160L RAIL THK Standard Rail (HSR) | BSPD Bearing ...
HSR35-1160L RAIL ; Rail type, Caged Ball Rail ; Maximum length, 1160 mm ; Nominal rail size, 35 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC.
LM Rail (HSR Type / Fixed Length) - MonotaRO Singapore
Apr 25, 2018 — Account. THK. LM Rail (HSR Type / Fixed Length). Rating: 80%. (1). Item #. 07297753. Mfr #. HSR 35+1160L. Package Qty.
thk hsr30 | eBay
Thk HSR30HB2SS+440L-II Linear Guide Rail W/ 2 Blocks 440mm. Brand New. C $306.16 ... THK Linear Guide Rail With Block HSR30CA1SS+1160L Set of 2. New (Other).
THK HSR35-1160L RAIL Distributor | 养贞轴承
Find details about thk HSR35-1160L RAIL, 的详情,获取价格参考、专业技术支持和免费3D 绘图下载。
: : THK
Results 1 - 48 of 580 — THK HSR35A2UU+600L-II Model HSR35 LM Guide (Linear Motion Guide) ... THK SSR35XW2UU+1160L Linear Slide Rail and Blocks ...