| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 3140 lbf |
| Bearing Weight | 0.6 Kg |
| r - Cup Backface To Clear Radius2 | 2.79 mm |
| e - ISO Factor8 | 0.33 |
| Da - Cup Frontface Backing Diameter | 67.10 mm |
| Series | 3100 |
| K - Factor7 | 1.76 |
| da - Cone Frontface Backing Diameter | 39.62 mm |
| B - Cone Width | 29.997 mm |
| G1 - Heat Generation Factor (Roller-Raceway) | 23.4 |
| G2 - Heat Generation Factor (Rib-Roller End) | 8.8 |
| Cage Type | Stamped Steel |
| Cone Part Number | 3193 |
| B | 30.165 mm |
| D | 72.034 mm |
| db - Cone Backface Backing Diameter | 45.47 mm |
| Cg - Geometry Factor | 0.0697 |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 5520 lbf |
| Aa - Cage-Cone Backface Clearance | 0.8 mm |
| d | 31.750 mm |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | e | d | m | D | C | B | C0 | Size |
| S2200 | ZEN | - | 10 mm | - | 30 mm | 5,3 kN | 14 mm | 1,53 kN | 10x30x14 |
| S2200-2RS | ZEN | - | 10 mm | - | 30 mm | 5,3 kN | 14 mm | 1,53 kN | 10x30x14 |
| AST11 F22200 | AST | - | 22 | - | 25 | - | - | - | - |
| AST40 F22200 | AST | - | 22 | - | 25 | - | - | - | - |
| 2200 | Loyal | - | 10 mm | - | 30 mm | 8,06 kN | 14 mm | 1,73 kN | 10x30x14 |
| 2200 ETN9 | SKF | - | 10 mm | - | 30 mm | - | 14 mm | - | 30x10x14 |
| 2200 TN9 | ISB | - | 10 mm | - | 30 mm | 7,90 kN | 14 mm | 1,70 kN | 10x30x14 |
| 2200-2RS | Loyal | - | 10 mm | - | 30 mm | 8,06 kN | 14 mm | 1,73 kN | 10x30x14 |
| 2200-2RS-TVH | FAG | 0,32 | 10 mm | 0,053 kg / Weight | 30 mm | - | 14 mm | - | 10x30x14 |
| 2200-2RSTN9 | ISB | - | 10 mm | - | 30 mm | 5,42 kN | 14 mm | 1,16 kN | 10x30x14 |
| 2200-TVH | FAG | 0,58 | 10 mm | 0,045 kg / Weight | 30 mm | - | 14 mm | - | 10x30x14 |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
HSR25-2200L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) Video
THK Standard Rail (HSR) - THK Global Standard LM Guide ...
Hisaka Vietnam would like to introduce you to the collection of THK Standard ... HSR20-2200L RAIL; HSR20-3000L RAIL; HSR20-L RAIL -Custom Length. HSR 25.HSR 25: HSR25-220L RAIL; HSR25-280L RAIL; ...HSR 30: HSR30-280L RAIL; HSR30-360L RAIL; ...HSR 55: HSR55-780L RAIL; HSR55-780L RAIL; ...HSR 65: HSR65-1270L RAIL; HSR65-1570L ...
THK Standard Rail (HSR) | BSPD Bearing Manufacturing
THK Standard Rail (HSR). The HSR guide rail and HSR of the steel ball bearing row are precision-grounded with 4 rolling ... HSR25-2200L RAIL, 25 mm, 2200 mm.
THK Store-Standard Rail (HSR)
Rail for HSR Blocks. View specifications and model number coding. Downloads - Log In required. General Catalog LM Guide; Quick Ship Catalog US102-2E.
GSR35 Series Linear Motion System | Technico
Like the THK HRW Series, the GSR models are compact, low profile, and able to bear loads in all directions. The LM rail and block are interchangeable with ...
THK HSR Series, HSR25-640L(GK), Linear Guide Rail 25mm ...
Buy THK HSR Series, HSR25-640L(GK), Linear Guide Rail 25mm width 640mm Length . Browse our latest Linear Guide Rails offers.
THK HSR25-1420L RAIL - THK,IKO,HIWIN,PMI-HRD-bearing
THK HSR25-1420L RAIL Linear Motion, LM Guides, Linear bearing, ... 580 640 700 760 820 940 1000 1060 1120 1180 1240 1360 1480 1600 1720 1840 1960 2080 2200 ...
LM Guide - THK Technical Support
HSR25 B 1 SS C1 H (GK) BLOCK. Model number coding. Type of. LM block. Model number. LM rail length. (in mm). HSR25 - 3000L H (GK) RAIL.36 pages
THK HSR25 Rail - Lavaink Inks Customized Parts
How to install THK HSR25 Rail? Loose or Tight the screws of THK HSR25 Rail Rail marked yellow to adjust the tension between block and linear rail. Must cleaning ...
THK HSR25-2200L RAIL Distributor | 养贞轴承
产品型号, HSR25-2200L RAIL. Rail type, Caged Ball Rail. Maximum length, 2200 mm. Nominal rail size, 25 mm. Measurement standard, 公制. 硬度, 58 to 64 HRC.