| a - Effective Center Location3 | -12.2 mm |
| e - ISO Factor8 | 0.41 |
| db - Cone Backface Backing Diameter | 179.07 mm |
| C0 - Static Radial Rating | 231000 lbf |
| Cage Type | Stamped Steel |
| Aa - Cage-Cone Backface Clearance | 8.6 mm |
| Series | 99000 |
| Y - ISO Factor9 | 1.47 |
| G2 - Heat Generation Factor (Rib-Roller End) | 73.5 |
| Cup Part Number | 99100P |
| K - Factor7 | 1.43 |
| D | 254.000 mm |
| B - Cone Width | 66.675 mm |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 26800 lbf |
| Db - Cup Backface Backing Diameter | 227.08 mm |
| R - Cone Backface To Clear Radius1 | 7.110 mm |
| Bearing Weight | 12.8 Kg |
| B | 66.675 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 38500 lbf |
| r - Cup Backface To Clear Radius2 | 3.30 mm |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
HSR55B1SS BLOCK THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),HSR-B Block Video
THK HSR55B1SS BLOCK Distributor | 养贞dafa888下载吧
Find details about thk HSR55B1SS BLOCK, 的详情,获取价格参考、专业技术支持和免费3D 绘图下载。
HSR55B1SS BLOCK THK Linear Motion Guide - 养贞轴承
Find details about thk HSR55B1SS BLOCK, Get price reference, professional technical support and free 3D drawing Download.
THK HSR55B1SS BLOCK - THK,IKO,HIWIN,PMI-HRD-bearing
THK HSR55B1SS BLOCK Linear Motion, LM Guides, Linear bearing, Linear Guide, Ball Splines, Ball Screws, electric actuators, mechatronics products, ...
HSR55 Series Linear Motion Guides - Technico Inc
Technico is a proud distributor of the THK HSR55 Series Linear Guide Systems. ... THK HSR55 A Block. THK HSR55 CA Arrow ... HSR55B1SS Block Only. $300.00.
HSR55B1SS BLOCK THK Linear Motion Guide | Lily Bearing
Part Number, HSR55B1SS BLOCK. Rolling Element, Balls. Block Type, B. Outer(mm), Height M, 70. Width W, 140. Length L, 163. Block(mm), B, 116.
THK HSR55B1SS *NEW-PLZ READ* Linear Bearing Block
MODEL: HSR55B1SS. The item available here is a NEW THK linear bearing. The bearing area is still in new condition as shown and will not affect performance ...
HSR-B Block - THK
The flange of this LM block has through holes. It is used in places where the table cannot have through holes for mounting bolts. HSR-B blocks are made to ...
THK HSR55B1SS Block - Lavaink Inks Customized Parts
THK HSR55B1SS Block eliminates the friction between the ball and increase the grease retention, in order to achieve low noise, high speed and long ...
THK America, Inc HSR55B1SS | Turtle & Hughes
DESCRIPTION. HSR55B1SS THK AMERICA INC Linear Guide Standard Ball Carriage Profile Rail - Series: HSR-B, Flanged Block, 55 mm Rail Size, 16THK_HSR_B_Block ...Brand Name: THK America, IncPart #: TH9 HSR55B1SS