| Oil Lubrication - T Seal | 2650 rpm |
| Dimension BC | 8.5 in |
| Dimension L Exp | 3.53 in |
| Engineering Group | Mounted Bearing |
| Shaft Size | 70 mm |
| Locking Style | Double V-Lock |
| Pre Install Clearance Min | 0.0037 in |
| C - Dynamic Load (Basic) | 57200 lb |
| Dimension N | 3.0000 in |
| Pre Install Clearance Max | 0.0047 in |
| Housing Style | Four-Bolt Square Fla |
| Dimension D | 6.650 in |
| UPC Code | 0883450366311 |
| Dimension RVV | 0.64 in |
| Grease Lubrication - M/N Seal | 1500 rpm |
| Y1 - Geometry Factor | 3.01 |
| Float | 0.083 in |
| e - Geometry Factor | 0.22 |
| C0 - Static Load | 62500 lb |
| Dimension H | 1.06 in |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | r | m | N | D | T | C | a | B |
| 00050/00150 | Loyal | - | - | - | 38,1 mm | 13,495 mm | 19,3 kN | 5,1 mm | 14,072 mm |
| 100FS150 | Timken | - | - | - | 150 mm | - | 55 mm | - | - |
| 100FSF150 | NSK | - | - | - | 150 mm | - | 510 kN | - | 70 mm |
| 150RUB32 | NSK | - | - | - | 270 mm | - | 690 kN | - | 96 mm |
| 150TMP12 | NSK | 2 | - | - | 215 mm | - | 375 | - | - |
| 150TMP93 | NSK | 2.1 | - | - | 250 mm | - | 635 | - | - |
| 150XRG23 | NACHI | 1,5 mm | - | - | 230 mm | 30 mm | 105 kN | - | 30 mm |
| 150XRN23 | NACHI | 1,5 mm | - | - | 230 mm | 30 mm | 105 kN | - | - |
| ZR3.32.3150.400-1SPPN | ISB | - | 20 mm | 56 mm | 3368 mm | - | - | - | - |
| ZR3.40.3150.400-1SPPN | ISB | - | 22 mm | 56 mm | 3388 mm | - | - | - | - |
| 150FSF220 | NSK | - | - | - | 220 mm | - | 1330 kN | - | 120 mm |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
SRS12W-150LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-W) Video
Factory In China Residential/ home/ passenger elevator, villa lift ...
... guide SRS12W-150LM - Hxh Bearing SHS30C Japan THK Linear Motion Guide and ... THK SRS12WMUU+550LM Factory price SRS12 SRS12WMUU SRS12WM linear guides ...
SRS12-W Series Caged Ball LM Guides - Technico Inc
THK SRS12W caged ball lm guides hold heavy load bearings in an aligned direction. ... Caged Ball LM Guide - 2SRS12WMUU+ 150LM. Rail Length(mm): 150. $175.00.
THK Store-SRS-M Set
units: mm. Model No. Outer dimensions, Block dimensions, Rail dimensions, Basic load rating. Radial. HeightM, WidthW, LengthL, B, C, S x l, Pitch
2SRS12WMUU+150LM - Standard Linear Guides - MISUMI
Miniature Linear Guide - Stocked Sizes, Standard and Wide, Standard Grade, SRS Series (THK) of THK,2SRS12WMUU+150LM, Check out the variety of configurable, ...Rail Type: WideShip Date: TBDMaterial: Stainless SteelMissing: SRS12W- | Must include: SRS12W-
SRS15-150LM RAIL THK Linear Motion Guide - bob竞技体育
Find details about thk SRS15-150LM RAIL, Get price reference, professional technical support and free 3D drawing Download.
Caged Ball LM Guide - THK Technical Support
In addition, the LM block and LM rail use stainless steel, which is highly resistant to corrosion. ○ Compact. Since SRS has a compact structure where the rail.24 pagesMissing: 150LM | Must include: 150LM
THK SRS12W-150LM Rail THK SSR Block - Lavaink Inks ...
This THK SRS12W-150LM Rail is for SSR Block. ID: SRS12W-150LM. Size: 12 mm. Rail Length: 150 mm. Pitch: 30 mm. Related products ...
THK SRS12W-150LM RAIL | THKbearing|ABBAbearing - dks ...
Brand: THK Item number: SRS12W-150LM RAIL. ... SRS-W Rail is for SRS-WM/WN Block. *Not for block of SRS-WM Set. The tech specs for THK SRS12W-150LM RAIL ...
SRS12W-150LM RAIL THK 微型导轨(SRS-WG) - 球轴承
产品型号, SRS12W-150LM RAIL. Rail type, Caged Ball Rail. Maximum length, 150 mm. Nominal rail size, 12 mm. Measurement standard, 公制. 硬度, 58 to 64 HRC.