| Backing Housing Diameter Ds | 859.0 mm |
| Width B | 670.000 mm |
| Lubrication Groove g | 25.3 mm |
| Number of Lubrication Holes | 16 |
| Backing Shaft Diameter ds | 705.9 mm |
| Chamfer r1smin2 | 18.0 mm |
| Dynamic Load Rating C11 | 45600 kN |
| Inner-Ring Set | 650ARXS2841 |
| Type | RX-1 |
| Weight | 3208.200 lb |
| Lubrication Hole Diameter h | 13.0 mm |
| DUR/DOR F/E | 723.000 mm |
| Outer-Ring Set | 723RXS2841 |
| Chamfer rsmin | 4.00 mm |
| Angle of Chamfer r1smin | 20º |
| Static Load Rating Co | 19520 kN |
| O.D. D | 920.000 mm |
| Width C | 670.000 mm |
| Bore d | 650.000 mm |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | B | D | E | T | F | L | J | C |
| 135TAD20 | NACHI | - | 200 mm | - | 84 mm | - | - | - | 109 kN |
| ZGB 120X135X120 | INA | 120 mm | 135 mm | - | - | - | - | - | 4320 kN |
| 5135 | Ruville | - | - | - | - | - | - | - | - |
| XHGB35135 | SNR | - | 136,5 mm | - | - | - | - | - | 84 mm |
| 135PCR2502 | NSK | - | - | - | - | - | 250 mm | 150 mm | - |
| 135PCR2701 | NSK | - | - | - | - | - | 270 mm | 180 mm | - |
| 135RIF580 | Timken | 57,15 mm | 457,2 mm | 435 mm | - | 365 mm | - | - | 57,15 mm |
| 135RIF582 | Timken | 104,77 mm | 527,1 mm | 494 mm | - | 376 mm | - | - | 104,77 mm |
| 135RIJ580 | Timken | 57,15 mm | 457,2 mm | 435 mm | - | 365 mm | - | - | 57,15 mm |
| 135RIJ582 | Timken | 104,77 mm | 527,1 mm | 494 mm | - | 376 mm | - | - | 104,77 mm |
| 135RIN580 | Timken | 57,15 mm | 457,2 mm | 435 mm | - | 365 mm | - | - | 57,15 mm |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
SRS9X-135LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-M) Video
THK SRS9X-135LM RAIL Distributor | 养贞轴承 - dota2鸭脖电竞
Find details about thk SRS9X-135LM RAIL, 的详情,获取价格参考、专业技术支持和免费3D 绘图下载。
SRS9X-175LM RAIL THK Linear Motion Guide | Lily ... - 上海养贞轴承
Find details about thk SRS9X-175LM RAIL, Get price reference, professional technical support and free 3D drawing Download.
SRS9X-135LM RAIL THK Miniature Rail (SRS-G) | BSPD Bearing ...
SRS9X-135LM RAIL ; Rail type, Caged Ball Rail ; Maximum length, 135 mm ; Nominal rail size, 9 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC.
SRS9_en.pdf - THK
Note) Since stainless steel is used in the LM block, LM rail and balls, these models are highly resistant to corrosion and environment. Symbol for.2 pagesMissing: 135LM | Must include: 135LM
THK SRS9X-135LM RAIL Distributor | 养贞dafa888下载吧
Find details about thk SRS9X-135LM RAIL, 的详情,获取价格参考、专业技术支持和免费3D 绘图下载。
THK SRS9X-135LM RAIL | THKbearing|ABBAbearing - dks ...
Description. THK SRS9X-135LM RAIL. units: mm. Model No. SRS 9X, SRS 12, SRS 15. LM rail standard length (L0), 55 75 95 115 135 155 175 195 275
SRS9X-135LM RAIL THK Linear Motion Guide | Lily Bearing
Part Number, SRS9X-135LM RAIL. Rail type, Caged Ball Rail. Maximum length, 135 mm. Nominal rail size, 9 mm. Measurement standard, Metric.
THK SRS9X-135LM RAIL
THK SRS9X-135LM RAIL Linear Motion, LM Guides, Linear bearing, Linear Guide, Ball Splines, Ball Screws, electric actuators, mechatronics products, ...
THK SRS9X-135LM RAIL from China manufacturer - DKS BEARING ...
THK SRS9X-135LM RAIL offered by China manufacturer DKS BEARING CO.,LTD. Buy THK SRS9X-135LM RAIL directly with low price and high quality.