| Bearing Weight | 9.3 lb |
| Cage Type | Stamped Steel |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 19100 lbf |
| C - Cup Width | 1.5000 in |
| Aa - Cage-Cone Backface Clearance | 0.11 in |
| r - Cup Backface To Clear Radius2 | 0.130 in |
| Da - Cup Frontface Backing Diameter | 5.94 in |
| C0 - Static Radial Rating | 99200 lbf |
| G2 - Heat Generation Factor (Rib-Roller End) | 29.4 |
| e - ISO Factor8 | 0.34 |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 11100 lbf |
| d | 3.5000 in |
| D1 - Flange Outer Diameter | 6.6830 in |
| da - Cone Frontface Backing Diameter | 3.9 in |
| Series | 755 |
| K - Factor7 | 1.71 |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 73600 lbf |
| G1 - Heat Generation Factor (Roller-Raceway)10 | 177 |
| T - Bearing Width to Flange | 0.6875 in |
| B - Cone Width | 1.9000 in |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | T | B | D | m | C | a | d | B1 |
| 3000 ZZ | Loyal | - | - | 26 mm | - | 5,7 kN | 12,3 mm | 10 mm | 12 mm |
| 3000-2RS | Loyal | - | - | 26 mm | - | 5,7 kN | 12,3 mm | 10 mm | 12 mm |
| 3000-B-2RSR-TVH | FAG | - | 12 mm | 26 mm | 0,022 kg / Weight | - | 12,3 mm | 10 mm | - |
| 3000-B-2Z-TVH | FAG | - | 12 mm | 26 mm | 0,022 kg / Weight | - | 12,3 mm | 10 mm | - |
| 3000-B-TVH | FAG | - | 12 mm | 26 mm | 0,022 kg / Weight | - | 12,3 mm | 10 mm | - |
| SE30002 | NTN | - | 218,000 mm | 2000,000 mm | - | 218,000 mm | - | 1500,000 mm | - |
| PW781300090CSHD | PFI | - | 90 mm | 130 mm | - | - | - | 78 mm | - |
| SC30001 | NTN | - | 218,000 mm | 2000,000 mm | - | 218,000 mm | - | 1500,000 mm | - |
| F300001 | Fersa | 113 mm | - | 196 mm | - | - | - | 82 mm | - |
| F300005 | Fersa | 140 mm | - | 196 mm | - | - | - | 70 mm | - |
| F300006 | Fersa | 84,9 mm | - | 120 mm | - | - | - | 45 mm | - |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
SHW27-3000L RAIL THK Linear Bearing,Linear Motion Guides,Wide, Low Gravity Center Caged Ball LM Guide (SHW),Wide Rail (SHW) Video
SHW-27 THK - Buy now at
Check out price, CAD & PDF file, and configure items as you need. THK linear guide rail SHW-27 for ball runner block.
SHW27-3000L RAIL THK Linear Motion Guide | Lily Bearing
SHW27-3000L RAIL THK Linear Motion Guide ; Rail type, Caged Ball Rail ; Maximum length, 3000 mm ; Nominal rail size, 27 mm ; Measurement standard, Metric ; Hardness ...
SHW27 Series Caged Ball LM Guides - Technico Inc
THK SHW27 Caged Ball LM Guide from Technico provides high precision & rigidity. ... Product Name, Rail Length(mm), Unit Price, Quantity, Select Product.
1. Features of the LM Guide
[email protected] www.thk.ru ... the two rails is as great as 0.3/200 mm, the LM Guide absorbs the error. ... SHS45R1SSHH+3000L (end seal and LaCS). 200m/min.
Caged Ball LM Guide - THK Technical Support
Model SHW, which has a wide LM rail and a low center of gravity, is optimal for locations requiring space saving and large Mc moment rigidity. ○ 4-way equal ...20 pagesMissing: 3000L | Must include: 3000L
Thk Linear Importers and Buyers List in Mexico - Export Genius
Linear system with carriage and rail for automation system brand: thk model: 2srs15gmuu-230lm ... "linear tracks for bearings, brand: thk, no: shw27-3000l".
THK SHW27-3000L RAIL
THK SHW27-3000L RAIL Linear Motion, LM Guides, Linear bearing, Linear Guide, Ball Splines, Ball Screws, electric actuators, mechatronics products, ...
Wide Rail (SHW) - THK
Wide Rail (SHW) ; SHW27-3000L RAIL, –. Out of stock. Out of stock ? Contact us to place an order ; SHW27-L RAIL - Custom Length ; Size: 35. Rail Length (mm): 280.
THK SHW35-2040L Rail THK SSR Block - Lavaink Inks ...
Description. THK SHW35-2040L Rail. 
.
.