| Lockwasher and Lockplates | P-48 |
| Sleeve | S-48 x 8 15/16 |
| Tolerance1 | -0.006 in |
| Diameter d | 8 15/16 in |
| S | 1.479 in |
| SNW/SNP Assembly Weight | 37.5 lb |
| Bearing Number | 22248K |
| D1 | 11.443 in |
| Series | 222K |
| Taper | 1:12 |
| Locknut | N-048 |
| B2 | 6.628 in |
Same THK Bearings Supply Ability | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | E | H | D | r | b | a | T | B |
| 712040510 | INA | - | - | 37 mm | - | - | - | - | - |
| 712040610 | INA | - | - | 37 mm | - | - | - | - | - |
| VKHB 2040 | SKF | - | - | 152,400 | - | - | - | - | - |
| X32040X/Y32040X | Timken | - | - | 310 mm | 2,5 mm | - | - | 70 mm | 70 mm |
| 112040/112085 | Gamet | - | - | 85 mm | 2 mm | - | - | 20,63 mm | 24,5 mm |
| 112040/112085C | Gamet | - | - | 85 mm | 2 mm | - | - | 20,63 mm | 24,5 mm |
| 112040/112085G | Gamet | - | - | 85 mm | 0,8 mm | - | - | 55 mm | - |
| 112040/112085H | Gamet | 19,57 mm | 4,76 mm | 85 mm | - | - | - | 55 mm | - |
| 112040/112085P | Gamet | - | - | 85 mm | 0,8 mm | - | - | 51,83 mm | 24,5 mm |
| BF12040 | INA | 11 mm | - | - | - | 40 mm | 10 mm | - | - |
| 712040310 | INA | - | - | 44 mm | - | - | - | - | - |
| HSR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Inner Ring Width:118 mm; Bore Taper:1/12; r - Outer Ring To Clear Radius2:3.0 mm; e - ISO Factor3:0.16; Reference Thermal Speed Rating (Grease):580; R - Inner Ring To Clear Radius1:3.0 mm; Cg - Geometry Factor8:0.0975; Y1 - ISO Factor5:6.17; B - Outer Ring Width:118.000 mm; da - Inner Ring Backi |
| HSR45-2670L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Sleeve Weight:48.50 lb; Locknut:N-052; L2:210.00 mm; Series:223K; Taper:1:12; Lockwasher and Lockplates:P-52; Removal Nut:RN-56; Sleeve:SK-28023; Diameter d:260 mm; Bearing Number:22356K; Major Diameter:301.27 mm; Tolerance1:-0.15 mm; Removal Nut O.D. C:385.78 mm; a:10.00 mm; |
| HSR45-2460L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Dimension SV:3.75 in; Shaft Size :85 mm; Dimension L Exp:4.54 in; Dimension H:1.50 in; Grease Lubrication - T Seal:1600 rpm; e - Geometry Factor:0.26; Dimension BC:11.75 in; Shaft Size Type:Metric; UPC Code:0883450341189; Dimension E:8.31 in; Dimension RV:0.71 in; Dimension L:4.46 in; Bea |
| HSR55-780L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Y2 - ISO Factor6:3.15; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):182; Y1 - ISO Factor5:2.12; K - Factor3:1.83; Da - Cup Frontface Backing Diameter:10.55 in; Cg - Geometry Factor8:0.117; Y - ISO Factor1:1.88; Series:LM241100; G1 - Heat Generation Factor (Roller-Raceway)7:774 |
| HSR35-1400L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Inside Ring Outside Diameter:3.980 in; Flange Thickness A1:22.2 mm; Dimension E:3.807 in; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Housing Style:Four-Bolt Square Fla; Static Load Rating:10100 lbf; Housing Width A:2.626 in; Bearing Number:GE75KRRB; Bolt Size:M16; Weigh |
| HSR45-2985L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Oil Lubrication - T Seal:1500 rpm; Housing Style:Round Flange; Pre Install Clearance Max:0.145 mm; Dimension R:0.59 in; Eng Internal Radial Clearance - Max:0.0057; Oil Lubrication - B/C/O Seal:400 rpm; Dimension BC:14.00 in; Float:0.083 in; C - Dynamic Load (Basic):170000 lb; e - Geometry Factor:0.2 |
| HSR45-2355L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | H:242 mm; UPC Code:999999999; Seal Type:Labyrinth; J:350.00 mm; L:410.00 mm; Locating Rings (width x OD):SR200X17.5; Shaft Diameter d:85 mm; N1:24.00 mm; J1:70 mm; N:18 mm; A1:120 mm; Material :Cast Iron; Housing Mass:22.3 Kg; Lockwasher:MB19; End Cover2:EC522-619; A:175.00 mm; Seal:LO619; Lock |
| HSR45-2565L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; K - Factor7:1.53; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cup Part Number:14283; R - Cone Backface To Clear Radius1:3.560 m |
| HSR45-2145L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Cr - Dynamic Load Rating:71105 lbf; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:96059 lbf; Housing Width:5.5 in; Dimension M :5-1/8 in; Maximum Speed:1970 rpm; Dimension K :3-1/4 in; Bolt Size:4 x 7/8; Dimension J1 :16 in; Bearing Type:Split Cylindric |
| HSR45-2880L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | a - Effective Center Location3:-12.2 mm; e - ISO Factor8:0.41; db - Cone Backface Backing Diameter:179.07 mm; C0 - Static Radial Rating:231000 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:8.6 mm; Series:99000; Y - ISO Factor9:1.47; G2 - Heat Generation Factor (Rib-Roller End):73.5 |
| HSR55-1020L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Da - Outer Ring Backing Diameter:673.000 mm; Bearing Weight:222 Kg; r - Outer Ring To Clear Radius2:5.000 mm; Cg - Geometry Factor8:0.1037; B - Outer Ring Width:167.000 mm; Bore Taper:1/12; C0 - Static Radial Rating:8160000 N; D:720.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; B - Inner Ring Wi |
| HSR45-2040L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Major Diameter:119.94 mm; Removal Nut O.D. C:160.32 mm; Taper:1:12; L2:98.00 mm; Removal Nut:ARN-22; Sleeve Weight:4.25 lb; Diameter d:100 mm; Locknut:AN-20; Lockwasher and Lockplates:W-20; Bearing Number:22322K; a:4.00 mm; Tolerance1:-0.10 mm; Series:223K; Sleeve:SK-11023; |
| HSR35-920L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | Grease Lubrication - M/N Seal:2200 rpm; Grease Lubrication - T Seal:3200 rpm; Dimension M:1.99 in; C0 - Static Load:31900 lb; Dimension L Fix:3.29 in; Bearing Number:22211; Pre Install Clearance Min:0.0016 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Dimension S:3.12 in; Dimension R:0.16 |
| HSR55-900L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard LM Guide (HSR),Standard Rail (HSR) | B - Double Cone Width:5.6875 in; K - Factor7:1.76; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:479000 lbf; R - Cone Frontface To Clear Radius2:0.130 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:124000 lbf; db - Cone Backface Backing Diameter:13.82 in; C90 - |
SR35-2040L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks Video
SR35 WSS THK - Buy now at
Check out price, CAD & PDF file, and configure items as you need. Linear bearing block THK SR35 WSS.
THK SR35 Linear Bearing Block
THK SR35 Linear Bearing Block: Amazon.com: Industrial & Scientific. ... Hardened Chrome Linear Rail Shaft for 3D Printer, DIY, CNC - Metric h8 Tolerance.
SR35-2040L RAIL - 养贞轴承
产品型号, SR35-2040L RAIL. Rail type, Caged Ball Rail. Maximum length, 2040 mm. Nominal rail size, 35 mm. Measurement standard, 公制. 硬度, 58 to 64 HRC.
SR35+2040L RAIL ONLY THK SR Series Linear Guide Systems
The SR Series of THK full-ball type linear guide systems boast a compact design with a low profile sectional height. The ball contact angle structure is set at ...
Standard Ball Profile Rail - Motion Canada
Results 1 - 12 of 1129 — THK SR35-2040L. Linear Guide Standard Ball Profile Rail - Series: SR35, 35 mm Rail, 2040 mm Max Length. MI ITEM 00029143.
SHS45-2040L RAIL THK Linear Motion Guide - bob竞技体育
Find details about thk SHS45-2040L RAIL, Get price reference, professional technical support and free 3D drawing Download.
Radial Rail (SR) for SSR Blocks - Sản phẩm THK - Công ty ...
Radial Rail (SR) for SSR Blocks is one of the outstanding products in THK's Radial Type Caged Ball LM Guide. Some popular models: Model No. Items Number. SSR ...
LM Guide - THK Technical Support
Flatness of the LM Rail and the LM Block Mounting Surface .. 團1-151 ... SR 15 SR 20 SR 25 SR 30 SR 35 SR 45 SR 55 SR 70 SR 85 SR 100 SR 120 SR 150. LM rail.666 pages
THK America, Inc SR35-2040L | Turtle & Hughes
DESCRIPTION. SR35+2040L THK AMERICA INC Linear Guide Standard Ball Profile Rail - Series: SR35, 35 mm Rail, 2040 mm Max Length THK_SR_Rail ...Part #: TH9 SR35-2040LBrand Name: THK America, Inc