Single Row Tapered Roller Bearings
Single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis (apex point A, ) to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor the larger the value of e, the larger the contact angle.
Single Row (TRB) Taper roller bearings can take both axial and radial loads. The axial load carrying capacity of the bearings is largely determined by the contact angle α as shown in the figure below. If the contact angle α is larger, then the axial load carrying capacity is higher and vice versa.This loading flexibility combined with a variety of configurations can be designed from single cups, double cups and cones. This is why tapered roller bearings are designed into almost every industry.
- ZKL 32312B Single Row Tapered Roller Bearings
- 100NNU68210
- 500x680x210
- ZKL 32312A Single Row Tapered Roller Bearings
- 675ZZ
- 5x8x2.5
- ZKL 30212A Single Row Tapered Roller Bearings
- 672H
- 2x4x1.2
- ZKL 31312A Single Row Tapered Roller Bearings
- 6800
- 10x19x5
- ZKL 32012AX Single Row Tapered Roller Bearings
- 247
- Imperial
- ZKL 32212A Single Row Tapered Roller Bearings
- 6801ZZ
- 12x21x5
- ZKL 32311A Single Row Tapered Roller Bearings
- Open
- Single Row
- ZKL 30311A Single Row Tapered Roller Bearings
- 639
- 9x30x10
- ZKL 32211A Single Row Tapered Roller Bearings
- 68/630
- 630x780x69
- ZKL 30211A Single Row Tapered Roller Bearings
- 6316ZZ
- 80x170x39