Single Row Tapered Roller Bearings
Single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis (apex point A, ) to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor the larger the value of e, the larger the contact angle.
Single Row (TRB) Taper roller bearings can take both axial and radial loads. The axial load carrying capacity of the bearings is largely determined by the contact angle α as shown in the figure below. If the contact angle α is larger, then the axial load carrying capacity is higher and vice versa.This loading flexibility combined with a variety of configurations can be designed from single cups, double cups and cones. This is why tapered roller bearings are designed into almost every industry.
- ZKL 33116A Single Row Tapered Roller Bearings
- 6413
- 65x160x37
- ZKL 30216A Single Row Tapered Roller Bearings
- 24034 K30
- 170x260x90
- ZKL 32315A Single Row Tapered Roller Bearings
- NKX 15
- 24x15x23
- ZKL 30215A Single Row Tapered Roller Bearings
- 6308 ZZ
- 40x90x23
- ZKL 30240A Single Row Tapered Roller Bearings
- 231/800EK
- 800x1280x375
- ZKL 32318A Single Row Tapered Roller Bearings
- R18
- 28.575x53.975x9.525
- ZKL 30302A Single Row Tapered Roller Bearings
- 68/630
- 630x780x69
- ZKL 32028AX Single Row Tapered Roller Bearings
- 6805-ZZ
- 75x85x10
- ZKL 32015AX Single Row Tapered Roller Bearings
- 6802
- 15x24x5
- ZKL 32314A Single Row Tapered Roller Bearings
- 3-15/16 in
- Aluminium Triple Labyrinth
- ZKL 31314A Single Row Tapered Roller Bearings
- 68/850/1080
- 850x1080x82