Single Row Deep Groove Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- ZKL 6315 Single Row Deep Groove Ball Bearings
- 340 mm
- 580 mm
- ZKL 6001 Single Row Deep Groove Ball Bearings
- 24144ce4c4-nsk
- In Stock
- ZKL 6201 Single Row Deep Groove Ball Bearings
- 850 mm
- 1180 mm
- ZKL 16001 Single Row Deep Groove Ball Bearings
- 400 mm
- 600 mm
- ZKL 62200 Single Row Deep Groove Ball Bearings
- 470 mm
- 720 mm
- ZKL 6300 Single Row Deep Groove Ball Bearings
- 140.000 mm
- 250.0000 mm
- ZKL 6200 Single Row Deep Groove Ball Bearings
- 600 mm
- 920 mm
- ZKL 6000 Single Row Deep Groove Ball Bearings
- 24140ce4c3-nsk
- In Stock
- ZKL 609 Single Row Deep Groove Ball Bearings
- 560 mm
- 800 mm
- ZKL 608 Single Row Deep Groove Ball Bearings
- 23168-b-k-mb-c4-qbl
- In Stock
- ZKL 618/8TNH Single Row Deep Groove Ball Bearings
- 380 mm
- 620 mm