Single Row Deep Groove Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- ZKL 16009 Single Row Deep Groove Ball Bearings
- 950 mm
- 1250 mm
- ZKL 6208 Single Row Deep Groove Ball Bearings
- 900 mm
- 1340 mm
- ZKL 6408 Single Row Deep Groove Ball Bearings
- 950 mm
- 1250 mm
- ZKL 6308 Single Row Deep Groove Ball Bearings
- 800 mm
- 1150 mm
- ZKL 16008 Single Row Deep Groove Ball Bearings
- 400 mm
- 600 mm
- ZKL 6008 Single Row Deep Groove Ball Bearings
- 24032cck30/c3w33-qbl
- In Stock
- ZKL 6407 Single Row Deep Groove Ball Bearings
- 900 mm
- 1180 mm
- ZKL 6307 Single Row Deep Groove Ball Bearings
- 340 mm
- 580 mm
- ZKL 6007 Single Row Deep Groove Ball Bearings
- 850 mm
- 1280 mm
- ZKL 16007 Single Row Deep Groove Ball Bearings
- 600 mm
- 980 mm
- ZKL 6406 Single Row Deep Groove Ball Bearings
- 23188camke4-nsk
- In Stock