Single Row Deep Groove Ball Bearings
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- ZKL 16003 Single Row Deep Groove Ball Bearings
- 23160-b-k-mb-c4-qbl
- In Stock
- ZKL 62202 Single Row Deep Groove Ball Bearings
- 35.000 mm
- 80.0000 mm
- ZKL 6302 Single Row Deep Groove Ball Bearings
- 340 mm
- 520 mm
- ZKL 6202 Single Row Deep Groove Ball Bearings
- 63.5 mm
- 130 mm
- ZKL 6002 Single Row Deep Groove Ball Bearings
- 45.000 mm
- 85.0000 mm
- ZKL 16002 Single Row Deep Groove Ball Bearings
- 800 mm
- 1060 mm
- ZKL 62201 Single Row Deep Groove Ball Bearings
- 70 mm
- 150 mm
- ZKL 6301 Single Row Deep Groove Ball Bearings
- 23264came4c3-nsk
- In Stock
- ZKL 6212 Single Row Deep Groove Ball Bearings
- 55.000 mm
- 120.0000 mm
- ZKL 6312 Single Row Deep Groove Ball Bearings
- 140 mm
- 225 mm
- ZKL 6411 Single Row Deep Groove Ball Bearings
- 50.000 mm
- 110.0000 mm
- ZKL 6012 Single Row Deep Groove Ball Bearings
- 21314e-qbl
- In Stock